Trusted Do I Need a Wet Tile Saw? Advice, Home DIY Tips, Cutting Tool Guide
Do I Need a Wet Tile Saw?
30 Mar 2020
Why Do I Need a Wet Tile Saw?
There are some jobs that you can do yourself, especially if you are handy at DIY. For many such jobs around the home you don’t need to be an expert, all you need is patience and the ability to follow instructions and advice.
This is why many people choose to get going in DIY, and build up a useful set of tools as a result. When it comes to decorating and improving the home, there are a number of jobs you can do, and the one we are talking about today is tiling. Tiles can be used in the kitchen and bathroom on walls, and in many areas both inside and outside the home on the floor or ground.
There is an art to tiling, but it’s one that is about planning ahead. Of course, you are not going to get the results you would see from a time-served, professional tiler by the DIY approach, but you can get a great look and at reduced cost. Before we go on to talk about what you need to get the best from DIY tiling there is some great advice on tiling on the internet at many renowned resources, so make sure you check them out.
Tools for Tiling
What tools do you need for tiling? Well, you’ll need a flat trowel to apply the adhesive as a first port of call, but you will also need a tool for cutting the tiles. There are many types of tile cutting devices, and some are more efficient than others.
We want to tell you about wet tile saws as they are the best for cutting accurately, and especially if you are laying larger floor tiles. What are they, and how do they work? You can read about some of the best wet tile saws and find out more detail, but let’s have a closer look in brief.
A wet tile saw uses water, as the name suggests. This allows for easier, smoother and more accurate cutting, and also prevents the tiles from cracking too easily. Tiles are subject to cracking thanks to their very nature, and with a wet saw you stand a greater chance of wasting as few as possible.
These saws are usually static and are mounted on a stand, and the water supply will need to be near to where you use the saw. You will also need a drain as water is applied to the tiles all the time they are being cut.
These saws are not expensive to buy and really do make the job easier, but do you need one? That depends if you are intending on cutting a large amount of tiles or just doing a one-off job. If the latter, it may be that you can get by with a manual, cheap tile cutting guillotine, available from any hardware store.
The result will not be as accurate, but they do the job and you can then put it away for possible future use. If you have a long, major tiling project planned, it will pay to look at wet tiles saws and there more information here that should help you find the right one.
Conclusion
The answer to the opening question – do I need a wet tile saw – is neatly summed up in the above paragraph, so it’s up to you. We recommend that if you are doing a small job now and perhaps looking at more tiling at a later date, you invest in a wet tile saw as it will certainly come in useful and make your tiling jobs a lot easier.
Comments on this guide to Do I Need a Wet Tile Saw? article are welcome.
Building Articles
Building Articles – Selection
Comments / photos for the Do I Need a Wet Tile Saw? Advice page welcome